Once in awhile you come across a feature on a boat that looks pretty smart, but then you realize it doesn't work as intended. We just had that experience with the waste outlet on my friend's Selene 40. It is recessed into the side of the cabin, out of the way and elevated off the side deck. This keeps it from leaking when the sealant used around the fitting eventually dries out and cracks. If it was installed flush on a side deck, this might allow standing water to penetrate the fitting.
Unfortunately, this recess created a different issue, which became obvious when we got the boat ready for winter haul out for storage. The pumpout hoses on many pumpout stations often has a built in handle to allow an operator to better control of the nozzle and put some leverage when holding the tip of the pumpout hose nozzle against the open discharge outlet on the boat. One must keep a bit of weight on the fitting to maintain the vacuum seal, or it doesn't pump, or leaks.
The handle of this hose we attempted to use would not fit in the recessed access, as the handle hit the fiberglass when trying to hold it square against the outlet. No amount of twisting or side angle gave us the necessary contact of the hose fitting in the hole of the outlet.
We could not get the pump to prime, and we had to give up.
A couple of days later, we grabbed a mooring ball in Spa Creek and called the Annapolis Harbormaster's mobile pumpout boat to give it another shot. Thankfully, the hose setup on this pumpout boat was configured differently and we successfully pumped out the boat's holding tank. But this issue got the attention of the boat's owner, Howard Brooks, to perhaps consider moving this waste fitting to a more universally accessible location, such as flat on a step on the side deck, where an operator can easily push down vertically over the discharge outlet to get and maintain the required vacuum seal of the hose and the discharge outlet. Fairfax Reckless Driving Lawyer
This experience reminded me once again of the need for accessible systems. The Selene is now put to bed for the winter.
Have a great week everyone!